|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TS4041 1.225V MICROPOWER SHUNT VOLTAGE REFERENCE s 1.225V TYP OUTPUT VOLTAGE s ULTRA LOW OPERATING CURRENT : 65A maximum at 25C s HIGH PRECISION @ 25C +/- 2% +/- 1% +/- 0.5% s HIGH STABILITY WHEN USED WITH CAPACITIVE LOADS s INDUSTRIAL TEMPERATURE RANGE: -40 to +85C s 150ppm/C MAXIMUM TEMPERATURE COEFFICIENT DESCRIPTION The TS4041 is a low power shunt voltage reference providing a stable 1.225V output voltage over the industrial temperature range (-40 to +85C). Availabe in SOT23-3 surface mount package, it can be designed in applications where space saving is a critical issue. The low operating current is a key advantage for power restricted designs. In addition, the TS4041 is very stable and can be used in a broad range of application conditions. APPLICATION Z TO92 (Plastic Package) L SOT23-3L (Plastic Micropackage) PIN CONNECTIONS (top view) s s s s s Computers Instrumentation Battery chargers Switch Mode Power Supply Battery operated equipments ORDER CODE Precision TO92 SOT23-3 SOT23 Marking L233 L232 L231 2% TS4041EIZ-1.2 TS4041EILT-1.2 1% TS4041DIZ-1.2 TS4041DILT-1.2 0.5% TS4041CIZ-1.2 TS4041CILT-1.2 Single temperature range: -40 to +85C Z = TO92 Plastic package - also available in Bulk (Z), Tape & Reel (ZT) and Ammo Pack (AP) LT = Tiny Package (SOT23-3) - only available in Tape & Reel (LT) March 2002 1/9 TS4041 ABSOLUTE MAXIMUM RATINGS Symbol Ik If Pd Tstd ESD Tlead Parameter Reverse Breakdown Current Forward Current Power Dissipation 1) Value 20 10 360 625 -65 to +150 2 200 260 Unit mA mA mW C kV V C SOT23-3 TO92 Storage Temperature Human Body Model (HBM) Machine Model (MM) Lead Temperature (soldering, 10 seconds) 1. Pd has been calculated with T amb = 25C and Tj = 150C and Rthja = 200C/W for the TO92 package Rthja = 340C/W for the SOT23-3L package OPERATING CONDITIONS Symbol Imin Imax Toper Minimum Operating Current Maximum Operating Current Operating Free Air Temperature Range Parameter Value 65 12 -40 to +85 Unit A mA C ELECTRICAL CHARACTERISTICS TS4041E (2% Precision) Tamb = 25C (unless otherwise specified) Symbol Vk Parameter Reverse Breakdown Voltage Test Condition Ik = 100A Min. 1.200 -25 -36 40 Typ. 1.225 Max. 1.250 +25 +36 65 70 150 0.3 2.5 0.25 120 200 2 2.5 8 10 0.5 Unit V mV A ppm/C I = 100A Reverse Breakdown Voltage Tolerance k -40C < Tamb < +85C Minimum Operating Current Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz Ikmin Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise mV ppm nV/Hz Rka Kvh En Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design. 2/9 TS4041 ELECTRICAL CHARACTERISTICS TS4041D (1% Precision) Tamb = 25C (unless otherwise specified) Symbol Vk Parameter Reverse Breakdown Voltage Test Condition Ik = 100A Min. 1.213 -12 -25 40 Typ. 1.225 Max. 1.237 +12 +25 65 70 150 0.3 2.5 0.25 120 200 2 2.5 8 10 0.5 Unit V mV A ppm/C I = 100A Reverse Breakdown Voltage Tolerange k -40C < Tamb < +85C Minimum Operating Current Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz Ikmin Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise mV ppm nV/Hz Rka Kvh En Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design. ELECTRICAL CHARACTERISTICS TS4041C (0.5% Precision)Tamb = 25C (unless otherwise specified) Symbol Vk Parameter Reverse Breakdown Voltage Test Condition Ik = 100A Min. 1.219 -6 -16 40 Typ. 1.225 Max. 1.231 +6 +16 60 65 120 0.3 2.5 0.25 120 200 1.5 2 6 8 0.5 Unit V mV A ppm/C I = 100A Reverse Breakdown Voltage Tolerange k -40C < Tamb < +85C Minimum Operating Current Tamb = 25C -40C < Tamb < +85C Ik = 100A Ikmin < Ik < 1mA -40C < Tamb < +85C 1mA < Ik < 12mA -40C < Tamb < +85C Ik = 45A to 1mA Ik = 100A, t = 1000hrs Ik = 100A 10Hz < f < 10kHz Ikmin Vref/T Average Temperature Coefficient Vk/Ik Reverse Breakdown Voltage Change with Operating Current Range Static Impedance Long Term Stability Wide Band Noise mV ppm nV/Hz Rka Kvh En Note : Limits are 100% production tested at 25C. Limits over temperature are guaranteed through correlation and by design. 3/9 TS4041 Reference voltage versus cathode current 12 8 4 0 -4 -8 Reference voltage versus cathode current 100 Cathode current (A) Cathode current (mA) 50 0 -50 -1 -0.5 0 0.5 1 1.5 -1 -0.5 Reference voltage (V) 0 1 0.5 Reference voltage (V) 1.5 Test circuit Reference voltage versus Temperature 1.26 1.25 Cathode voltage (V) R Ik=(Vin-Vref)/R Vout=Vref +2% +1% +0.5% 1.24 1.23 1.22 1.21 1.2 1.19 -40 -0.5% -1% -2% -20 0 20 40 60 80 Temperature (C) Static impedance versus temperature 0.25 Static impedance (Ohms) 0.24 0.23 0.22 0.21 0.2 -40 Noise voltage versus frequency 800 CL=10F Noise voltage (nV/Hz) 600 400 CL=100F 200 CL=0F 0 -20 0 20 40 60 Temperature (C) 80 0 1 10 100 1,000 10,000 Frequency (kHz) 4/9 TS4041 Pulse response for Ik=100A 3V Test circuit for pulse response at Ik=100A 18K Ik=1 00A 0V Input 1.225V 0V Output 0 2 4 6 8 10 Time (s) Pulse response for Ik=1mA 3V Input Test circuit for pulse response at Ik=1mA 1.8K Ik=1m A 0V 1.225V Output 0V 0 2 4 6 8 10 Time (s) Output 5/9 Intput Pulse G enerator Output Intput P ulse G enerator TS4041 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE & REEL) A1 P P T H d A H1 H0 H I1 W0 D0 F1 F2 P2 P0 W2 W1 W L1 Millimeters Dim. Min AL A T d I1 P PO P2 F1/F2 h P W W0 W1 W2 H H0 H1 DO L1 Typ. Max. 5.0 5.0 4.0 0.45 2.5 11.7 12.4 5.95 2.4 -1 -1 17.5 5.7 8.5 12.7 12.7 6.35 2.5 0 0 18.0 6 9 13.7 13 6.75 2.8 1 1 19.0 6.3 9.75 0.5 20 16.5 25 4.2 11 0.098 0.461 0.488 0.234 0.094 -0.039 -0.039 0.689 0.224 0.335 Min. Inches Typ. Max. 0.197 0.197 0.157 0.018 0.500 0.500 0.250 0.098 0 0 0.709 0.236 0.354 0.539 0.512 0.266 0.110 0.039 0.039 0.748 0.248 0.384 0.020 0.787 0.650 0.984 0.165 0.433 15.5 3.8 16 4.0 0.610 0.150 0.630 0.157 6/9 TS4041 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (TAPE AMMO PACK) A1 P P T H d A H1 H0 H I1 W0 D0 F1 F2 P2 P0 W2 W1 W L1 Millimeters Dim. Min AL A T d I1 P PO P2 F1/F2 h P W W0 W1 W2 H H0 H1 DO L1 Typ. Max. 5.0 5.0 4.0 0.45 2.5 11.7 12.4 5.95 2.4 -1 -1 17.5 5.7 8.5 12.7 12.7 6.35 2.5 0 0 18.0 6 9 13.7 13 6.75 2.8 1 1 19.0 6.3 9.75 0.5 20 16.5 25 4.2 11 0.098 0.461 0.488 0.234 0.094 -0.039 -0.039 0.689 0.224 0.335 Min. Inches Typ. Max. 0.197 0.197 0.157 0.018 0.500 0.500 0.250 0.098 0 0 0.709 0.236 0.354 0.539 0.512 0.266 0.110 0.039 0.039 0.748 0.248 0.384 0.020 0.787 0.650 0.984 0.165 0.433 15.5 3.8 16 4.0 0.610 0.150 0.630 0.157 7/9 TS4041 PACKAGE MECHANICAL DATA 3 PINS - PLASTIC PACKAGE TO92 (BULK) Millimeters Dim. Min L B O1 C K O2 a 3.2 4.45 4.58 12.7 0.407 0.35 Typ. 1.27 3.7 5.00 5.03 0.5 Max. 4.2 5.2 5.33 0.508 Min. 0.126 0.1752 0.1803 0.5 0.016 0.0138 Inches Typ. 0.05 0.1457 0.1969 0.198 0.0197 Max. 0.1654 0.2047 0.2098 0.02 8/9 TS4041 PACKAGE MECHANICAL DATA 3 PINS - TINY PACKAGE (SOT23) D e GAUGE PLANE 0.25 k L E1 E b c e1 C A2 Millimeters Dimensions Min. A A1 A2 b c D E E1 e e1 L L1 k 0.890 0.010 0.880 0.300 0.080 2.800 2.100 1.200 Typ. Max. 1.120 0.100 1.020 0.500 0.200 3.040 2.640 1.400 Min. 0.035 0.0004 A1 A 0.10 SEATING PLANE C L1 Inches Typ. Max. 0.044 0.004 0.040 0.020 0.008 0.120 0.104 0.055 0.950 0.037 0.012 0.003 0.110 0.083 0.047 2.900 1.300 0.950 1.900 0.500 0.540 0.114 0.051 0.037 0.075 0.020 0.021 0.400 0 0.600 8 0.016 0.024 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States (c) http://www.st.com - United Kingdom 9/9 |
Price & Availability of TS4041 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |